OM4 50/125 LC To LC Duplex 2.0mm Multimode Fiber Optic Cable-Shenzhen Modulelink Technology Co., Ltd

Modulelink FWDM filter 1310 1550 optical splitter and FWDM T1550 R1310&1490 can achieve 1550/1310&1490 two channel optical signal multiplexing and demultiplexing, genaratiing single optical fiber transmission capacity multiplier, Widely used in optical fiber network upgrading and CATV network etc.

FWDM Splitter 1310/1490/1550nm 80km

Modulelink FTTX Filter WDM module is design and manufactured based on Thin Film Filter (TFF) technology. The device combines or separates light at different wavelengths in a wide wavelength range. They can be working well with very low insertion loss, low polarization dependence, high isolation and excellent environmental stability. Modulelink FTTH/FTTX 1310/1550nm FWDM Filter WDM can differ the multiplexing and de-multiplexing of communication optical signals of 1310nm and 1550nm. It can expand the capacity of a single fiber to achieve bidirectional transition, so it is widely used in optical network upgrade and expansion, or introduce new comprehensive business etc. GEPON system itself works on 1310/1490, so CATV signal here is delivered over same fiber using 1550nm, and FWDM is a place where all this gets "mixed".

Fiber Optic Connectors Single Mode FC/SC/LC/ST

Modulelink Field Assembly fast connectors for FTTH can provide a quick and easy termination of fibers in the field. Options can be available for 900 micron allowing the installer to terminate and make connection in minutes at equipment and fiber patch panels. The connector system removes any requirement for epoxy, adhesives or costly curing ovens and polishing and fibe ederface inspection.

LC Female To SC Male Singlemode Hybrid Fiber Optic Adapter

Modulelink Fiber optic adapters are mainly designed to connect two fiber optic patch cables together. They come in various types, most adapters are female on both ends to connect two patch cables, while some adapters are male to female which allow the port to accept a different connector than for which it was originally designed. Moduleink assemble various of hybrid adapters which accept different types of connectors.

SC to LC Fiber Optic Adapter, Duplex/Simplex, Single mode/Multimode, PC/APC type

Modulelink Male-Female hybrid fiber adapter (Build-out Type hybrid fiber adapter) is a fiber adapter with a connector plug (male) end and an adapter socket (female) end. Optical Adaptors are developed to couple and mate two identical or two different (hybrid) connector plugs. The housing of the Adaptors of the last generation has a reference key for the right position coupling and zirconia or phosphorus bronze split sleeve for high alignment. Users can choose 9/125, 50/125, 62.5/125 and other fiber types and the corresponding connector type. The SC to LC hybrid Fiber Adapter is to provide SC Fiber Patchcord to LC Fiber Patchcord Fiber connecting. SC to LC hybrid fiber adaptors combine SC plastic fiber adapter with LC plastic fiber adapter, allow Mating of two different diameter ferrule Fiber Patchcord connecting. Modulelink can make and provide both Male-Female and Female-Female hybrid fiber adapters bridging popular connector types, such as ST, FC, SC, LC, MU, FDDI, E2000, MPO. They are precision made and manufactured to demanding specifications.

LC To FC LSZH Sheath Patch Cord Single Mode

Modulelink Ruggedised flat twin fiber patch cords with an additional outer jacket for durability in singlemode (OS1) and multimode (OM1, OM2, OM3 & OM4) available, It is used for indoor distribution and as pigtail communication equipment. It is suitable for communication equipment that is served, it is easy to install and simple to operate.

SC/APC To SC/APC Single Mode Simplex 3.5M Patch Cord

Modulelink 1.2mm/1.6mm patch cord normally is used to be where is limited space, it as other standard patch cable jacketed with PVC/LSZH and then completed with SC, ST, FC or LC connectors. It provides a stable and reliable connection both SM or MM and single or dual fiber. PC, UPC and APC is optional by any color.

PLC Splitter Bare Device

Modulelink makes and provides high quality bare fiber PLC splitter, that can be easily applied in the construction of FTTx, construction of optical network and CATV networks, maintaining low insertion loss. It is high precision splitter for building optical network, composed with high quality material. High placement requirements, position and environment is not needed and it has compact micro type design. It is especially suitable for small room installation and can be easily placed in different types of terminal boxes and distribution boxes, in favor of the merger and to remain in the tray without reserve of additional space.

Steel Tube PLC Splitter

Modulelink PLC splitter is the optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. It has stronger fiber protection than bare fiber splitter, which is a miniaturization result of cassette splitter. It's mostly used in various connection and distribution boxes or network cabinets.

100GHz Thermal Array Waveguide Grating (AWG) ABS box

Moduelink 100GHz AWG device is to multiplex 40 optical signals with different wavelengths onto one optical fiber (multiplexing), or separate 40 optical signals multiplexed in one optical fiber by wavelength (demultiplexing). It generates mature flat-top type thermal array waveguide grating technology and adopts a sealed technology package to ensure high environmental stability.

AWG 1U Chassis Optical Multiplexer And Demultiplexer

Modulelink's two types of 40Ch 100G MUX/DEMUX AWG, Flattop and Gaussian, all of them are passive, no power. Flat top type is normal and Max IL is 5dB, cost-effective. The Max IL of Gaussian is 3.5dB. AWG is widely used to the WDM-PON system now while the 5G network is coming.

FWDM Splitter With High Stability

Modulelink FWDM filter 1310 1550 optical splitter and FWDM T1550 R1310&1490 can achieve 1550/1310&1490 two channel optical signal multiplexing and demultiplexing, genaratiing single optical fiber transmission capacity multiplier, Widely used in optical fiber network upgrading and CATV network etc.

FWDM Splitter 1310/1490/1550nm 80km

Modulelink FTTX Filter WDM module is design and manufactured based on Thin Film Filter (TFF) technology. The device combines or separates light at different wavelengths in a wide wavelength range. They can be working well with very low insertion loss, low polarization dependence, high isolation and excellent environmental stability. Modulelink FTTH/FTTX 1310/1550nm FWDM Filter WDM can differ the multiplexing and de-multiplexing of communication optical signals of 1310nm and 1550nm. It can expand the capacity of a single fiber to achieve bidirectional transition, so it is widely used in optical network upgrade and expansion, or introduce new comprehensive business etc. GEPON system itself works on 1310/1490, so CATV signal here is delivered over same fiber using 1550nm, and FWDM is a place where all this gets "mixed".

Fiber Optic Connectors Single Mode FC/SC/LC/ST

Modulelink Field Assembly fast connectors for FTTH can provide a quick and easy termination of fibers in the field. Options can be available for 900 micron allowing the installer to terminate and make connection in minutes at equipment and fiber patch panels. The connector system removes any requirement for epoxy, adhesives or costly curing ovens and polishing and fibe ederface inspection.

LC Female To SC Male Singlemode Hybrid Fiber Optic Adapter

Modulelink Fiber optic adapters are mainly designed to connect two fiber optic patch cables together. They come in various types, most adapters are female on both ends to connect two patch cables, while some adapters are male to female which allow the port to accept a different connector than for which it was originally designed. Moduleink assemble various of hybrid adapters which accept different types of connectors.

SC to LC Fiber Optic Adapter, Duplex/Simplex, Single mode/Multimode, PC/APC type

Modulelink Male-Female hybrid fiber adapter (Build-out Type hybrid fiber adapter) is a fiber adapter with a connector plug (male) end and an adapter socket (female) end. Optical Adaptors are developed to couple and mate two identical or two different (hybrid) connector plugs. The housing of the Adaptors of the last generation has a reference key for the right position coupling and zirconia or phosphorus bronze split sleeve for high alignment. Users can choose 9/125, 50/125, 62.5/125 and other fiber types and the corresponding connector type. The SC to LC hybrid Fiber Adapter is to provide SC Fiber Patchcord to LC Fiber Patchcord Fiber connecting. SC to LC hybrid fiber adaptors combine SC plastic fiber adapter with LC plastic fiber adapter, allow Mating of two different diameter ferrule Fiber Patchcord connecting. Modulelink can make and provide both Male-Female and Female-Female hybrid fiber adapters bridging popular connector types, such as ST, FC, SC, LC, MU, FDDI, E2000, MPO. They are precision made and manufactured to demanding specifications.

LC To FC LSZH Sheath Patch Cord Single Mode

Modulelink Ruggedised flat twin fiber patch cords with an additional outer jacket for durability in singlemode (OS1) and multimode (OM1, OM2, OM3 & OM4) available, It is used for indoor distribution and as pigtail communication equipment. It is suitable for communication equipment that is served, it is easy to install and simple to operate.

SC/APC To SC/APC Single Mode Simplex 3.5M Patch Cord

Modulelink 1.2mm/1.6mm patch cord normally is used to be where is limited space, it as other standard patch cable jacketed with PVC/LSZH and then completed with SC, ST, FC or LC connectors. It provides a stable and reliable connection both SM or MM and single or dual fiber. PC, UPC and APC is optional by any color.

PLC Splitter Bare Device

Modulelink makes and provides high quality bare fiber PLC splitter, that can be easily applied in the construction of FTTx, construction of optical network and CATV networks, maintaining low insertion loss. It is high precision splitter for building optical network, composed with high quality material. High placement requirements, position and environment is not needed and it has compact micro type design. It is especially suitable for small room installation and can be easily placed in different types of terminal boxes and distribution boxes, in favor of the merger and to remain in the tray without reserve of additional space.

Steel Tube PLC Splitter

Modulelink PLC splitter is the optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. It has stronger fiber protection than bare fiber splitter, which is a miniaturization result of cassette splitter. It's mostly used in various connection and distribution boxes or network cabinets.

100GHz Thermal Array Waveguide Grating (AWG) ABS box

Moduelink 100GHz AWG device is to multiplex 40 optical signals with different wavelengths onto one optical fiber (multiplexing), or separate 40 optical signals multiplexed in one optical fiber by wavelength (demultiplexing). It generates mature flat-top type thermal array waveguide grating technology and adopts a sealed technology package to ensure high environmental stability.

Connector	LC to LC	Jacket OD	2.0/3.0mm
Fiber Mode	9/125μm or 50/125um	Jacket Color	Yellow/Aqua or Violet
Polish	PC to PC	Wavelength	1310/1550nm
Cable Type	Duplex	Jacket Material	LSZH, OFNP
Insertion loss	≤0.3dB(max)	Interchangeability	≤0.2dB
Return loss	≥50dB(min)	Vibration	≤0.2dB
Operating temperature	-40~75°C	Storage temperature	-45~85°C
Polarity	A(Tx) to B(Rx)	Fiber Grade	9/125 50/125 OM3 OM4