Products

Get to Us

+
  • 5(6).jpg

Optical Mux/Demux CWDM Rack Type Fiber Optic Multiplexer

Modulelink CWDM mux/demux is using optical multiplexers to re-use different wavelengths of light into a single fiber-transmitted signal. At the receiving end of the link, the mixed signal is decomposed into signal splits in the fiber by means of an optical demultiplexer. Different wavelengths are connected to the corresponding receiving device.

Product Serial Number :

Catalogue:

CWDM Multiplexers

  • Description
  • Applications
    • Commodity name: Optical Mux/Demux CWDM Rack Type Fiber Optic Multiplexer

    Modulelink CWDM mux/demux is using optical multiplexers to re-use different wavelengths of light into a single fiber-transmitted signal. At the receiving end of the link, the mixed signal is decomposed into signal splits in the fiber by means of an optical demultiplexer. Different wavelengths are connected to the corresponding receiving device.

    • Low insertion loss
    • High isolation
    • Low PDL
    • Compact design
    • Good channel-to-channel consistency
    • Wide operating wavelength: 1270-1610nm
    • Wide working temperature: -20 ° C ~ 70 ° C
    • High reliability and stability
    Key words:
    • MUX/DEMUX
    • CWDM

  • CWDM system

    PON network

    Cable chain

    Technical Parameters

    Parameter

    4CH

    6CH

    8CH

    Center Wavelength(nm)

    ITU or ITU+1(Customizable starting wavelength)

    Product Features

    Mux or Demux or Mux&Demux

    Channel Wavelength (nm)

    1270~1610

    Center Wavelength Accuracy (nm)

    ±0.5

    Channel Spacing (nm)

    20

    Channel Passband(@ -0.5dbband(nm)

    >14

    Insertion Loss(dB)

    ≤1.4

    ≤2.6

    ≤3.0

    Channel Uniformity(dB)

    ≤0.5

    ≤0.5

    ≤0.5

    Channel Ripple(dB)

    0.3

    Isolation(dB) Adjacent

    >30

    >30

    >30

    Isolation (dB) Non-adjacent

    >40

    >40

    >40

    Polarization-dependent Loss(dB)

    <0.2

    Polarization-mode Dispersion(PS)

    <0.1

    Directionality(dB)

    >50

    Return loss(dB)

    >45

Keyword:

MUX/DEMUX

CWDM

Data Sheet

Quote Request

Related Products

100M Media Converters

100M Media Converters

Modulelink media converter transforms the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance to several or hundred kilometer. Using media converter is a economical solution to achieve long distance transmission base on current status. This product supports IEEE802.3UI 100Base-Tx/Fx protocol, as well as full duplex and half duplex mode. The transmission media adopts Cat5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire (10/100M).

1000M Media Converters

1000M Media Converters

Modulelink media converter supports IEEE802.3z 1000Base-Tx/Fx protocol, as well as full duplex and half duplex mode. The fiber to ethernet converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance to several or hundred kilometer. Using media converter is a economical solution to achieve long distance transmission base on current status.

10G Media Converters

10G Media Converters

Modulelink 10GbE fiber media converter lets you scale your network using the 10Gb SFP+ transceiver that best suits your network type and distance requirements. It's a cost-effective way to convert copper to fiber, or fiber to copper, and it integrates easily into a range of 10Gb network infrastructures. The 10G fiber converter delivers fast and reliable network access at longer distances than copper-based networks, making it ideal for server rooms or workstations in remote areas or in other buildings. This high-performance fiber media converter integrates nicely into a variety of 10 Gigabit networks. And, because the card supports up to 10Gbps throughput, you can quickly bridge your traditional 10Gb copper (RJ45) based network across long distances using fiber-optic cable. 10 Gigabit Ethernet media converters allow the backbone of the network to be flexible and easier to manage and maintain. Our converters are available in two form factors, chassis-based slide-in cards and stand-alone converters, allowing you the most flexibility for your network. Our converters also utilize both fixed optics and Small Form-Factor Pluggable (SFP) transceivers allowing you to customize each converter for the cable type you are using.

1x4, 1x8, 1x16, 1x18 1270nm - 1610nm CWDM Mux/Demux With LC Connector ABS Box

1x4, 1x8, 1x16, 1x18 1270nm - 1610nm CWDM Mux/Demux With LC Connector ABS Box

Modulelink makes and supplies a full range of CWDM Mux-Demux and Optical Add Drop Multiplexer (OADM) units to suit all kinds applications and network solutions. The most popular ones are: Gigabit & 10G Ethernet, SDH/SONET, ATM, ESCON, Fibre Channel, FTTx and CATV. Modulelink's Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path. Modulelink CWDM Mux Demux products offers up to 16-channel or even 18-channel Multiplexing on a single fiber. Due the low insertion loss is needed in WDM networks, we can also add "Skip Component" in a CWDM Mux/Demux module to reduce the IL as an option. Standard CWDM Mux/Demux package type include: ABS box package, LGX package and 19" 1U rackmount.

High Isolation CWDM Mux Demux Bare Device 1270~1610nm Wavelength

High Isolation CWDM Mux Demux Bare Device 1270~1610nm Wavelength

Modulelink CWDM mux/demux is using optical multiplexers to reuse different wavelengths of light into a single fiber to transmit signals. At the receiving end of the link, the mixed signal is decomposed into signals in the fiber by means of an optical demultiplexer. Different wavelengths are connected to the corresponding receiving equipment.

CWDM Optical Add/Drop Module

CWDM Optical Add/Drop Module

Modulelink makes and supplies a full range of CWDM Mux-Demux and Optical Add Drop Multiplexer (OADM) units to suit all kinds applications and network solutions. The most popular ones are: Gigabit & 10G Ethernet, SDH/SONET, ATM, ESCON, Fibre Channel, FTTx and CATV. Modulelink' Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path.

Dense Wavelength Division Multiplexing 100G DWDM Mux Demux ABS box type

Dense Wavelength Division Multiplexing 100G DWDM Mux Demux ABS box type

Modulelink Dense wavelength division multiplexing (DWDM) is a technology that puts together -- multiplexes -- data signals from different sources so they can share a single optical fiber pair while maintaining complete separation of the data streams. Each signal is carried on a separate light wavelength; the dense part of DWDM refers to the fact that more than 80 separate wavelengths, each about 0.8 of a nanometer (nm) wide, can share a single optical fiber.

Bare Device DWDM Mux Demux Wavelength Division Multiplexer

Bare Device DWDM Mux Demux Wavelength Division Multiplexer

Modulelink DWDM Mux/Demux and OADM units are an integral part of various network solutions and it offers a full range of plug-and-play modules for Gigabit & 10G Ethernet, ESCON, SDH/SONET, ATM, CATV, FTTX, and other applications. Modulelink proprietary DWDM Mux/Demux modules utilize non-flux metal bonding micro optics packaging to reach optical add and drop at ITU wavelengths. With thin-film coating technology, our units provide high channel isolation, low insertion loss, low-temperature sensitivity, and an epoxy-free optical path.

DWDM Mux Demux Rackmount

DWDM Mux Demux Rackmount

Modulelink DWDM multiplexer/demultiplexer is designed and manufactured for multi-wavelength DWDM network applications. It works on an ITU grid with 100 GHz channel spacing based on thin-film filter (TFF) technology. The wavelength range of DWDM is from 1270nm to 1610nm with an optional ITU channel wavelength. It has a series of advantages, such as multi-kind of packaging structures, low insertion loss, high channel isolation, and so on.

DWDM Optical Add Drop Wavelength Division Multiplexer 100G/200G Low Insertion Loss

DWDM Optical Add Drop Wavelength Division Multiplexer 100G/200G Low Insertion Loss

Modulelink 100GHz/200GHz wavelength multiplexer(100,200G DWDM OADM Module) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging to achieve optical add or drop at a ITU wavelength. It provides ITU channel center wavelength, low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path. It can be used for wavelength add/drop in telecommunication network system.

Get to Us

CONTACT US TODAY
%{tishi_zhanwei}%

+86-755-28683083

ID: adam-zhang1

3rd floor Block 2, Tianlong Science Industry Park,Kengzhi Town, Longgang Area, Shenzhen, China.