Products

Products

Get to Us

QSFP+ 40G AOCs

Modulelink AOC cables achieve an aggregate data rate of 40Gbps over 100 meters transmission. The cables are designed to be fully compatible with QSFP+ Multi-Source Agreement. Modulelink QSFP+ Active Optical Cables (AOC) are high performance, cost-effective I/O solutions for LAN, HPB, and SAN. With 4 independent data transmission and receiving channels via multiple optical fibers.

QSFP+ 40G AOCs

SFP28 25G AOCs

Modulelink AOC cable is suitable for a short connection between two SFP+ ports in 25G interconnecting networking applications, such as high-performance computing (HPC), enterprise networking including top-of-rack switching and network storage markets. The 25G AOC is with lightweight that better than the 25G SFP28 copper DACs.

SFP28 25G AOCs

SFP+ 10G AOCs

Modulelink SFP+ Active Optical Cables are hot-swappable, low-voltage cable assemblies that connect directly into SFP+ modules at both ends. These cables use a 20-position connector with active circuitry to increase distances and to improve EMI and reduce signal loss. Modulelink SFP+ Active Optical Cable transmits 10Gbps data in each direction over a loose tube fiber with distance up to 100m.

SFP+ 10G AOCs

QSFP28 100G DACs

Modulelink 100G direct attach copper cable assembly (DAC) is suitable for very short distances and offers a highly cost-effective way to establish a 100 Gigabit link connectivity between devices using QSFP28 ports. The QSFP28 DAC cable is designed for 100Gb/s high-speed interconnecting networking applications such as high-performance computing (HPC), enterprise networking including top-of-rack switching and network storage markets. The QSFP28-100G DAC copper cable is programmed to be compatible with a wide range of network equipment for intra-rack connections in data centers such as 100GE Switches, Routers, Network Interface Cards (NICs) and Network Storage Systems.

QSFP28 100G DACs

QSFP+ 40G DACs

Modulelink 40G direct attach copper cable assembly (DAC) is suitable for very short distances and offers a highly cost-effective way to establish a 40 Gigabit link connectivity between devices using QSFP ports. The QSFP+ DAC cable is designed for 40Gb/s high-speed interconnecting networking applications such as high-performance computing (HPC), enterprise networking including top-of-rack switching and network storage markets. It fully complies with QSFP+ Multi-Source Agreement (MSA) standards SFF-8436 and IEEE 802.3ba 40GBASE-CR4. The QSFP+ 40G DAC copper cable is programmed to be compatible with a wide range of network equipment for intra-rack connections in data centers such as 40GE Switches, Routers, Network Interface Cards (NICs) and Network Storage Systems.

QSFP+ 40G DACs

SFP28 25G DACs

Modulelink 25G SFP28 DAC cables offer precision external cable assembly solutions. They meet the ever increasing demand for higher channel density with high-level signal integrity in high performance computing, top-of-rack switching, and network storage deployments. The DAC cables extremely low-insertion loss due to the unique foam skin, gas-injected dielectric technology as well as extreme control of balanced/unbalanced (Mode conversion). The technology offers ease of cable management and smaller packaging densities. The cable assemblies employ new, innovative PCB technology designed specifically to deliver signal integrity performance. The cables regulate cross talk and launch conditions between wire and PCB termination to optimize return loss and prevent or minimize “ringing” effects.

SFP28 25G DACs

SFP+ 10G DACs

Modulelink 10G SFP+ DAC cables are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. SFP+ DAC cable which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly.

SFP+ 10G DACs

100M Media Converters

Modulelink media converter transforms the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance to several or hundred kilometer. Using media converter is a economical solution to achieve long distance transmission base on current status. This product supports IEEE802.3UI 100Base-Tx/Fx protocol, as well as full duplex and half duplex mode. The transmission media adopts Cat5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire (10/100M).

100M Media Converters

1000M Media Converters

Modulelink media converter supports IEEE802.3z 1000Base-Tx/Fx protocol, as well as full duplex and half duplex mode. The fiber to ethernet converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance to several or hundred kilometer. Using media converter is a economical solution to achieve long distance transmission base on current status.

1000M Media Converters

10G Media Converters

Modulelink 10GbE fiber media converter lets you scale your network using the 10Gb SFP+ transceiver that best suits your network type and distance requirements. It's a cost-effective way to convert copper to fiber, or fiber to copper, and it integrates easily into a range of 10Gb network infrastructures. The 10G fiber converter delivers fast and reliable network access at longer distances than copper-based networks, making it ideal for server rooms or workstations in remote areas or in other buildings. This high-performance fiber media converter integrates nicely into a variety of 10 Gigabit networks. And, because the card supports up to 10Gbps throughput, you can quickly bridge your traditional 10Gb copper (RJ45) based network across long distances using fiber-optic cable. 10 Gigabit Ethernet media converters allow the backbone of the network to be flexible and easier to manage and maintain. Our converters are available in two form factors, chassis-based slide-in cards and stand-alone converters, allowing you the most flexibility for your network. Our converters also utilize both fixed optics and Small Form-Factor Pluggable (SFP) transceivers allowing you to customize each converter for the cable type you are using.

10G Media Converters

1x4, 1x8, 1x16, 1x18 1270nm - 1610nm CWDM Mux/Demux With LC Connector ABS Box

Modulelink makes and supplies a full range of CWDM Mux-Demux and Optical Add Drop Multiplexer (OADM) units to suit all kinds applications and network solutions. The most popular ones are: Gigabit & 10G Ethernet, SDH/SONET, ATM, ESCON, Fibre Channel, FTTx and CATV. Modulelink's Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path. Modulelink CWDM Mux Demux products offers up to 16-channel or even 18-channel Multiplexing on a single fiber. Due the low insertion loss is needed in WDM networks, we can also add "Skip Component" in a CWDM Mux/Demux module to reduce the IL as an option. Standard CWDM Mux/Demux package type include: ABS box package, LGX package and 19" 1U rackmount.

1x4, 1x8, 1x16, 1x18 1270nm - 1610nm CWDM Mux/Demux With LC Connector ABS Box

Optical Mux/Demux CWDM Rack Type Fiber Optic Multiplexer

Modulelink CWDM mux/demux is using optical multiplexers to re-use different wavelengths of light into a single fiber-transmitted signal. At the receiving end of the link, the mixed signal is decomposed into signal splits in the fiber by means of an optical demultiplexer. Different wavelengths are connected to the corresponding receiving device.

Optical Mux/Demux CWDM Rack Type Fiber Optic Multiplexer
< 1...9101112 >

Get to Us

CONTACT US TODAY
%{tishi_zhanwei}%

+86-755-28683083

ID: adam-zhang1

3rd floor Block 2, Tianlong Science Industry Park,Kengzhi Town, Longgang Area, Shenzhen, China.