Products

Products

Get to Us

Optical Transceiver EPON ONU SFP 1.25G 1000BASE-PX20+

Modulelink Transceiver is designed for Gigabit Ethernet Passive Optical Network (EPON) 20km transmission. The module incorporates 1310nm burst-mode transmitter and 1490nm continuous-mode receiver. The transmitter section uses a 1310nm FP laser and an integrated BM laser driver which is designed to perform very small burst enable/disable delay time. The laser driver also includes digital APC and temperature compensation circuit, which are used for keeping the launch optical power and extinction ratio constant over temperature and aging. The receiver section uses an integrated 1490nm InGaAs Pin photodiode and preamplifier mounted together. It has the function that indicates receiver signal-detected status(active high). An integrated WDM coupler can separate 1490nm input light and 1310nm output light.

Optical Transceiver EPON ONU SFP 1.25G 1000BASE-PX20+

Optical Transceiver SFP OC-3/STM-1 15km 1310nm LC connector

Modulelink transceiver is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of switches and routers, can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.

Optical Transceiver SFP OC-3/STM-1 15km 1310nm LC connector

Optical Transceiver 100Base-FX SFP OC-3/STM-1 For MMF, LC

Modulelink SFP is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of switches and routers, can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.

Optical Transceiver 100Base-FX SFP OC-3/STM-1 For MMF, LC

Optical Transceiver SFP 1310nm 40km single-mode OC-3/STM-1/Fast Ethernet

Modulelink transceiver is a compact, hot-pluggable transceiver used for both telecommunication and data communications applications. The form factor and electrical interface are specified by a multi-source agreement (MSA). It interfaces a network device motherboard (for a switch, router, media converter or similar device) to a fiber optic or copper networking cable. It is a popular industry format jointly developed and supported by many network vendors. SFP transceivers are designed to support SONET, Gigabit Ethernet, Fibre Channel, and other communications standards.

Optical Transceiver SFP 1310nm 40km single-mode OC-3/STM-1/Fast Ethernet

Optical Transceiver SFP 1310nm 80km single-mode OC-3/STM-1/Fast Ethernet

Modulelink SFP 100FX Interface Converter is a hot-swappable input/output device that plugs into a FX Ethernet port or slot, linking the port with the network. They can be used and interchanged on a wide variety of switches and routers, can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.

Optical Transceiver SFP 1310nm 80km single-mode OC-3/STM-1/Fast Ethernet

Optical Transceiver SFP 155M BIDI 20km 1310nm/1550nm LC/SC Connector

Modulelink SFP transceiver module is used in optical communications. The SFP transceiver modules are designed to support SONET/H, Fast Ethernet, Gigabit Ethernet, Fibre Channel and other communications standards. SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of 155M/1.25Gbps/1.0625Gbps and 80km transmission distance with SMF.The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

Optical Transceiver SFP 155M BIDI 20km 1310nm/1550nm LC/SC Connector

Optical Transceiver SFP 155M BIDI 40km 1310nm/1550nm LC/SC Connector

Modulelink transceivers are a high performance, cost effective module which have a single LC/SC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1310 nm FP laser, up to 19dB link budge ensure this module SONET OC-3 / SDH STM-1 40km application.

Optical Transceiver SFP 155M BIDI 40km 1310nm/1550nm LC/SC Connector

Optical Transceiver SFP 155M BIDI 80km 1490nm/1550nm LC/SC Connector

Modulelink transceivers are high performance, cost effective modules which have a single LC/SC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1550 nm DFB laser, up to 29dB link budge ensure this module SONET OC-3 / SDH STM-1 80km application.

Optical Transceiver SFP 155M BIDI 80km 1490nm/1550nm LC/SC Connector

Optical Transceiver SFP 155M 40km CWDM Duplex LC 1270nm ~ 1610nm SM DDM

Modulelink transceiver is a high performance, cost effective module which has a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 1270nm ~ 1610nm CWDM DFB laser, up to 29dB link budge ensure this module SONET OC-3/SDH STM-1 40km application.

Optical Transceiver SFP 155M 40km CWDM Duplex LC 1270nm ~ 1610nm SM DDM

Optical Transceiver SFP 155M 80km CWDM Duplex LC 1270nm ~ 1610nm SM DDM

Modulelink transceiver is a high performance, cost effective module which have a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 1270nm ~ 1610nm CWDM DFB laser, up to 29dB link budge ensure this module SONET OC-3/SDH STM-1 80km application.

Optical Transceiver SFP 155M 80km CWDM Duplex LC 1270nm ~ 1610nm SM DDM

Optical Transceiver SFP 155M 120km CWDM Duplex LC 1270nm ~ 1610nm SM DDM

Modulelink transceiver is a high performance, cost effective module which has a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 1270nm ~ 1610nm CWDM DFB laser, up to 29dB link budge ensure this module SONET OC-3/SDH STM-1 120km application.

Optical Transceiver SFP 155M 120km CWDM Duplex LC 1270nm ~ 1610nm SM DDM

QSFP28 100G AOCs

Moduelink 100G QSFP28 Parallel Active Optical Cables (AOC) are a high performance, cost-effective interconnect solution supporting InfiniBand EDR/QDR/DDR/SDR, 25G/12.5G/10G/8G/4G/2G fiber channel, PCIE and SAS. With 4 full-duplex, independent data transmission and receiving channels, Moduelink 100G AOC Cables achieve an aggregate data rate of 101.6 Gbps over 100 meters transmission. The cables are designed with form factor, optical/electrical connection according to the QSFP Multi-Source Agreements (MSA).

QSFP28 100G AOCs
< 1...8910...12 >

Get to Us

CONTACT US TODAY
%{tishi_zhanwei}%

+86-755-28683083

ID: adam-zhang1

3rd floor Block 2, Tianlong Science Industry Park,Kengzhi Town, Longgang Area, Shenzhen, China.