Products

1G Transceivers

Get to Us

Optical Transceiver SFP 1.25G dual fiber multimode 2km 1310nm LC DDM

Modulelink transceiver is a high performance, cost effective module which have a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 1310 nm FP laser, up to 8dB link budge ensure this module 1000Base Ethernet 2km application.

Optical Transceiver SFP 1.25G dual fiber multimode 2km 1310nm LC DDM

Optical Transceiver SFP 1.25G MM 850nm 550m Duplex LC DDM

Modulelink SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 550m transmission distance with MMF. The transceiver consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. They are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

Optical Transceiver SFP 1.25G MM 850nm 550m Duplex LC DDM

Optical Transceiver SFP 1.25G 1310nm 10KM LC DDM

Modulelink SFP module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFP typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector. It is designed to transmit and receive optical data over single mode optical fiber for link length 10km and is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled.

Optical Transceiver SFP 1.25G 1310nm 10KM LC DDM

Optical Transceiver SFP 1.25G 1310nm 40KM LC DDM

Modulelink transceivers are high performance, cost effective modules which have a single LC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1490 nm DFB laser, up to 21dB link budge ensure this module 1000Base-EX Ethernet 40km application.

Optical Transceiver SFP 1.25G 1310nm 40KM LC DDM

Optical Transceiver SFP 1.25G dual fiber singlemode 80km 1550nm LC DDM

Modulelink SFP transceiver is a high performance, cost effective module which has a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 1550 nm DFB laser, up to 22dB link budge ensure this module 1000Base Ethernet 80km application.

Optical Transceiver SFP 1.25G dual fiber singlemode 80km 1550nm LC DDM

Optical Transceiver SFP 1.25Gb dual fiber singlemode 120km 1550nm LC DDM

Modulelink SFP transceiver is a high performance, cost effective module which has a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 1550 nm DFB laser, up to 32dB link budge ensure this module 1000Base Ethernet 120km application.

Optical Transceiver SFP 1.25Gb dual fiber singlemode 120km 1550nm LC DDM

Optical Transceiver SFP WDM 1.25G SFP BIDI 1310/1550nm or 1310/1490nm 40KM LC DDM

Modulelink 1.25G bidi 40km SFP Transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser(the 1550nm or 1490nm DFB laser)and the PIN/TIA .The module data link up to 40km in 9/125um Single-mode fiber.

Optical Transceiver SFP WDM 1.25G SFP BIDI 1310/1550nm or 1310/1490nm 40KM LC DDM

Optical Transceiver SFP WDM 1.25G SFP BIDI 1310/1550nm 10KM or 20KM LC DDM

Modulelink 1.25G BIDI SFP supports dual data-rate of 1250MGbps and from 10km to 20km transmission distance with SMF. The 1.25G BIDI SFP consists of two sections: The transmitter section incorporates a FP laser. the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). They satisfy class I laser safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault indicates that degradation of the laser. Loss of signal (LOS) output indicates the loss of an input optical signal of receiver. The standard serial ID information compatible with SFP MSA describes the transceiver's capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial bus. For more information, please refer to SFP Multi-Source Agreement (MSA).

Optical Transceiver SFP WDM 1.25G SFP BIDI 1310/1550nm 10KM or 20KM LC DDM

Optical Transceiver SFP WDM 1.25G SFP BIDI 1490/1550nm 80KM LC DDM

Modulelink SFP Transceiver is a high performance, cost effective module which has a single LC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1550 nm DFB laser, up to 22dB link budge ensure this module 1000Base-ZX Ethernet 80km application.

Optical Transceiver SFP WDM 1.25G SFP BIDI 1490/1550nm 80KM LC DDM

Optical Transceiver SFP WDM 1.25G SFP BIDI 1490/1550nm 120KM LC DDM

Modulelink transceivers are high performance, cost effective modules which have a single LC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1490 nm DFB laser, up to 31dB link budge ensure this module 1000Base-ZX Ethernet 120km application.

Optical Transceiver SFP WDM 1.25G SFP BIDI 1490/1550nm 120KM LC DDM

Optical Transceiver SFP 1.25G 40km CWDM Duplex LC 1270nm-1610nm SM DDM

Modulelink transceiver is small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-EX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eighteen center wavelengths available from 1270nm to 1610nm, with each step 20nm. The transmitter section uses a multiple quantum well CWDM DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. The CWDM-SFP-GE40-XX series are designed to be compliant with SFF-8472.

Optical Transceiver SFP 1.25G 40km CWDM Duplex LC 1270nm-1610nm SM DDM

Optical Transceiver SFP 1.25G 80km CWDM Duplex LC 1270nm-1610nm SM DDM

Modulelink transceiver is small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. This module is designed by Modulelink and it is small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eighteen center wavelengths available from 1270nm to 1610nm, with each step 20nm. The transmitter section uses a multiple quantum well CWDM DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Optical Transceiver SFP 1.25G 80km CWDM Duplex LC 1270nm-1610nm SM DDM
< 12 >

Get to Us

CONTACT US TODAY
%{tishi_zhanwei}%

+86-755-28683083

ID: adam-zhang1

3rd floor Block 2, Tianlong Science Industry Park,Kengzhi Town, Longgang Area, Shenzhen, China.