Products

Products

Get to Us

Optical Transceiver XFP 10G CWDM 80km LC SMF DDM

Modulelink XFP CWDM is a fully integrated 10Gbps optical transceiver module. It is hot-pluggable and fully compliant with the MSA. The channel spacing grid for CWDM is standardized (ITU-T G.694.2), and VCHUNG's transceivers operate from 1270nm to 1610nm. They are widely used for 10G Ethernet and are fully compatible with a 10G SONET/SDH. The transmission distance for XFP CWDM transceivers starts at 10km, and it can go up to 80km.

Optical Transceiver XFP 10G CWDM 80km LC SMF DDM

Optical Transceiver XFP 10G DWDM 40km LC SMF DDM

Modulelink DWDM XFP transceiver provides an enhanced monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage. They exhibits excellent wavelength stability, supporting operation at 100 GHz channel, cost effective module. It is designed for 10G DWDM SDH, 10GBASE-ER/EW and 10G Fiber- Channel applications.

Optical Transceiver XFP 10G DWDM 40km LC SMF DDM

Optical Transceiver XFP 10G DWDM 80km LC SMF DDM

Modulelink 10G XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications. These Transceivers can operate over a single wavelength or use dense wavelength-division multiplexing techniques. They include digital diagnostics that provide management that were added to the SFF-8472 standard. XFP modules use an LC fiber connector type to achieve high density.

Optical Transceiver XFP 10G DWDM 80km LC SMF DDM

Optical Transceiver XFP 10G DWDM 80km Tunable

Modulelink Tunable 10 Gb/s XFP transceiver is an integrated ber optic transceiver that provides a high-speed serial link at signaling rates from 9.95 Gb/s to 11.35 Gb/s. The module complies with the 10 Gigabit small form factor pluggable (XFP) multisource agreement-MSA (INF-8077i) and Tunable XFP for ITU Frequency Grid Applications(SFF-8477). It complies with the ITU-T G.698.1 standard with 50 GHz channel spacing for SONET/SDH, IEEEDWDM 10GBASE-ZR for 80km reach (Ethernet), and DWDM 10GFC for 80km reach (Fiber Channel)applications.

Optical Transceiver XFP 10G DWDM 80km Tunable

Optical Transceiver 8G SFP+ Fibre Channel (8GFC) 150m Extended Temperature

Modulelink SFP+ transceivers are designed and manufactured for use in Fibre Channel links up to 8.5 Gb/s data rate over multimode fiber. The optical transceiver is RoHS compliant as described in Application Note AN-2038 and compliant with FC-PI-4 Rev. 8.00 and SFF-8472 Rev 11.0, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1.

Optical Transceiver 8G SFP+ Fibre Channel (8GFC) 150m Extended Temperature

Optical Transceiver 8G SFP+ 8G Fibre Channel (8GFC) 10km

Modulelink SFP+ optical transceivers are designed and manufactured for use in Fibre Channel links up to 8.5 Gb/s data rate and up to 10 km link length. The optical transceiver is RoHS compliant as described in Application Note AN-2038 and compliant with FCPI-4 Rev. 7.00 and SFF-8472 Rev 10.1, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 1.3.

Optical Transceiver 8G SFP+ 8G Fibre Channel (8GFC) 10km

Optical Transceiver SFP 1.25G dual fiber multimode 2km 1310nm LC DDM

Modulelink transceiver is a high performance, cost effective module which have a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 1310 nm FP laser, up to 8dB link budge ensure this module 1000Base Ethernet 2km application.

Optical Transceiver SFP 1.25G dual fiber multimode 2km 1310nm LC DDM

Optical Transceiver SFP 1.25G MM 850nm 550m Duplex LC DDM

Modulelink SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 550m transmission distance with MMF. The transceiver consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. They are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

Optical Transceiver SFP 1.25G MM 850nm 550m Duplex LC DDM

Optical Transceiver SFP 1.25G 1310nm 10KM LC DDM

Modulelink SFP module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFP typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector. It is designed to transmit and receive optical data over single mode optical fiber for link length 10km and is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled.

Optical Transceiver SFP 1.25G 1310nm 10KM LC DDM

Optical Transceiver SFP 1.25G 1310nm 40KM LC DDM

Modulelink transceivers are high performance, cost effective modules which have a single LC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1490 nm DFB laser, up to 21dB link budge ensure this module 1000Base-EX Ethernet 40km application.

Optical Transceiver SFP 1.25G 1310nm 40KM LC DDM

Optical Transceiver SFP 1.25G dual fiber singlemode 80km 1550nm LC DDM

Modulelink SFP transceiver is a high performance, cost effective module which has a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 1550 nm DFB laser, up to 22dB link budge ensure this module 1000Base Ethernet 80km application.

Optical Transceiver SFP 1.25G dual fiber singlemode 80km 1550nm LC DDM

Optical Transceiver SFP 1.25Gb dual fiber singlemode 120km 1550nm LC DDM

Modulelink SFP transceiver is a high performance, cost effective module which has a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 1550 nm DFB laser, up to 32dB link budge ensure this module 1000Base Ethernet 120km application.

Optical Transceiver SFP 1.25Gb dual fiber singlemode 120km 1550nm LC DDM
< 1...678...12 >

Get to Us

CONTACT US TODAY
%{tishi_zhanwei}%

+86-755-28683083

ID: adam-zhang1

3rd floor Block 2, Tianlong Science Industry Park,Kengzhi Town, Longgang Area, Shenzhen, China.