Rack Type Fiber Optic Multiplexer_Media Converters_Hybrid Fiber Optic Adapter_SFP CWDM

Optical Transceiver SFP WDM 1.25G SFP BIDI 1310/1550nm or 1310/1490nm 40KM LC DDM

Modulelink 1.25G bidi 40km SFP Transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser(the 1550nm or 1490nm DFB laser)and the PIN/TIA .The module data link up to 40km in 9/125um Single-mode fiber.

Optical Transceiver SFP WDM 1.25G SFP BIDI 1310/1550nm 10KM or 20KM LC DDM

Modulelink 1.25G BIDI SFP supports dual data-rate of 1250MGbps and from 10km to 20km transmission distance with SMF. The 1.25G BIDI SFP consists of two sections: The transmitter section incorporates a FP laser. the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). They satisfy class I laser safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault indicates that degradation of the laser. Loss of signal (LOS) output indicates the loss of an input optical signal of receiver. The standard serial ID information compatible with SFP MSA describes the transceiver's capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial bus. For more information, please refer to SFP Multi-Source Agreement (MSA).

Optical Transceiver SFP WDM 1.25G SFP BIDI 1490/1550nm 80KM LC DDM

Modulelink SFP Transceiver is a high performance, cost effective module which has a single LC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1550 nm DFB laser, up to 22dB link budge ensure this module 1000Base-ZX Ethernet 80km application.

Optical Transceiver SFP WDM 1.25G SFP BIDI 1490/1550nm 120KM LC DDM

Modulelink transceivers are high performance, cost effective modules which have a single LC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1490 nm DFB laser, up to 31dB link budge ensure this module 1000Base-ZX Ethernet 120km application.

Optical Transceiver SFP 1.25G 40km CWDM Duplex LC 1270nm-1610nm SM DDM

Modulelink transceiver is small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-EX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eighteen center wavelengths available from 1270nm to 1610nm, with each step 20nm. The transmitter section uses a multiple quantum well CWDM DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. The CWDM-SFP-GE40-XX series are designed to be compliant with SFF-8472.

Optical Transceiver SFP 1.25G 80km CWDM Duplex LC 1270nm-1610nm SM DDM

Modulelink transceiver is small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. This module is designed by Modulelink and it is small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eighteen center wavelengths available from 1270nm to 1610nm, with each step 20nm. The transmitter section uses a multiple quantum well CWDM DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Optical Transceiver SFP 1.25G 120km CWDM Duplex LC 1470nm-1610nm SM DDM

Modulelink transceiver is small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eighteen center wavelengths available from 1470nm to 1610nm, with each step 20nm. The transmitter section uses a multiple quantum well CWDM DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Optical Transceiver SFP 1.25G 160km CWDM Duplex LC 1470nm-1610nm SM DDM

Modulelink transceiver is a small form factor pluggable module for duplex optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eighteen center wavelengths available from 1470nm to 1610nm, with each step 20nm. The transmitter section uses a multiple quantum well CWDM DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Optical Transceiver GPON ONU Sticker SFP TX 1.25G/RX 2.5G 20KM Tx1310nm/Rx1490nm SM

Modulelink transceiver supports Time of Day and 1PPS interface, can be managed from the OLT over the GPON using G.988 OMCI. It fits seamlessly into existing communications equipment, providing service providers with a smooth upgrade to GPON. The solution vastly decreases the installation costs of deploying fiber access in MDUs and enables service providers to improve their revenue streams while decreasing OPEX.

Optical Transceiver GPON ONU SFP TX1310nm 1.25G/RX 1490nm 2.5G

Modulelink GPON ONU SFP Module is designed for passive optical network application. It can fully support the Class B+/C+ ODN application specified by the ITU-T G.984.2 standard and ITU-T G.984.2 Amendent1. It is fully compliant with IEEE 802.3ah-2004. It is packaged of small form package with SC connector. The digital diagnostic monitoring function is fully compliant with SFP MSA. It is 1310nm un-cooled DFB Laser, InGaAs preamplifier and WDM filter in a high-integrated optical sub-assembly. It transmits 1.244Gbps at 1310nm in burst mode and receives 2.488Gbps at 1490nm in continuous mode.

Optical Transceiver GPON SFP OLT Class C++ Single Fiber single mode

Modulelink SFP transceiver is the high performance module for single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. It is optical line terminal(OLT) for ITU-T G984.2. The optical transceiver is compliant with the Small Form- Factor Pluggable (SFP) Multi-Source Agreement (MSA). The transmitter section uses a 1490nm DFB LD with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio over all operating temperature range. and is ClassⅠlaser compliant IEC825 and CDRH standards.The receiver has a hermetically packaged burst-mode APD-TIA (trans-impedance amplifier) pre-amplifier and a burst-mode limiting amplifier with LVPECL compatible differential outputs.

Optical Transceiver EPON OLT SFP PX20+ 1.25G 1310/1490nm Simplex SC Connector

Modulelink transceiver supports data rate of typical 1.25 Gbps for GEPON OLT application up to 20km transmission distance, it's designed meeting with Telecom EPON equipment technical requirement. The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF.The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.